E-Archive

VOL. 15 November ISSUE YEAR 2014

Articles

in Vol. 15 - November Issue - Year 2014
The Dust Collector Protects Against Dust From Aluminium Linishing Processes
A Farr Gold Series

A Farr Gold Series

The GS16 is installed outside the factory providing more space, less noise and a cleaner working environment

The GS16 is installed outside the factory providing more space, less noise and a cleaner working environment

Challenge

This company, located on the West Coast of Scotland, is a leading global development partner in the avionics and automotive industry. They offer unique systems competence regarding internal combustion engines and engine peripherals, ranking among the top three systems suppliers worldwide for engine components such as piston systems, cylinder components and valve trains. Their facility in Scotland manufactures precision bearings for the automotive industry.
This customer was using wet type dust extractors in their manufacturing area to control the dust from their aluminium linishing operations. There were several issues with these wet type dust collectors. They were noisy, inefficient and had to be cleaned out at least once a week. However, most importantly of all, they did not comply with the local emissions regulations.

Solution

Russell Consulting Scotland Ltd., a specialist in providing independent advice for local exhaust ventilation systems, contacted their long-term business partner Camfil Air Pollution Control (APC). They did this on behalf of this Scottish company for the purpose of providing the best solution to meet the challenges above.
Camfil APC, specialised in dust control systems, proposed a high-tech, custom-designed dust extraction system that would meet all the customer's demands.
The solution is based on a GS16 Farr Gold Series® dust collector. As aluminium dust is highly explosive, the dust extractor had to be fully ATEX compliant. The dust collector incorporates an integral dropout section to remove large volumes of dust from the airstream prior to the air passing through the filter cartridges. This reduces the dust loading on the cartridges and so improves the filter life. Over 1000 kg per week of collected material is discharged from the collector via three rotary valves into 1m3 flexible bags.
The GS16 Farr Gold Series was fitted with carbon-impregnated HemiPleat Gold Cone filter cartridges, and was supplied complete with an access platform as well as an energy-saving variable speed drive controlled by a differential pressure monitor. The system installed provides highly efficient extraction ensuring that operators are protected from exposure to dust generated during the linishing process.
SEPA, the Scottish Environment Protection Agency has tested the system and they concluded that it is an, "excellent installation".
The customer concerned is delighted with their new dust extraction system, as it has both improved the working environment and reduced maintenance costs. Moreover, production no longer needs to be shut down each week in order to clean the dust collector.

PRODUCT INFORMATION
Product: Farr Gold Series® dust collector
Size: GS16 with drop out section
Air Volume: 18.000 m3/hr
Application: Aluminium Linishing
Customer: Russell Consulting Scotland Ltd.
End User: A global company involved in the avionics/ automotive sector, Scotland
Installation date: May 2013

For Information:
Camfil APC
Unit C, Birch Business Park
Heywood, OL10 2SX, UK
Tel. +44.1706.363.820
E-mail: europe.apc@camfil.com
www.camfilapc.com/europe