82 articles matches for Almen strips from year 2000 to present
Article Topic:
Peening
Blasting
Vibratory Finishing
Cleaning
Miscellaneous
Residual Stress Measurements
MFN had the pleasure to talk to Keynes Khu, Marketing Director of Yanchen Saipu Metal Product Co., Ltd.
Author: Wolfgang Hennig
Author: Glyn Richards
Author: L.Wagner; M.Wollmann; C. Becker; V. Jannaschk; A.Montabaur
Author: Michele Bandini
Langtry Blast Technologies Inc. (L.B.T.I.) came to market in early 2002, and have since become a major designer and manufacturer of blast equipment in North America. The company was founded...
Author: Mike Langtry
Measuring residual stress is all in a day’s work at Proto Manufacturing. One could almost claim that every day’s work at Proto Manufacturing is about measuring residual stress!
Author: Glyn Richards
Besides fulfilling the general specifications for Almen strips, the most important requirement for the strips is the arc-height repeatability. That means that Almen strips show always the same arc height,...
Author: Robert Drake
Author: Paul Huyton
The 1st edition of MFN's SHOT PEENING was released in 2006. Six years later, two editions have been sold out and a completely revised and updated 3rd edition of SHOT...
Author: Andrzej Wojtas
Abstract: The effectiveness of the shot peening process is dependent upon the energy transfer that occurs during the impact of shots with the target surface and the uniformity of the...
The requirements for flap peening have become more stringent since the new specification AMS 2590 was put in place. The rotary tool should be capable of operating at the specified...
Abstract: This article describes the method and the results for the development of a direct comparability between shot peening and deep rolling. Therefore the method of generating saturation curves by...
Author: Dipl.-Ing. Goetz G.Feldmann, Dr.-Ing. Thomas Haubold, Wolfgang Hennig, Dipl.-Ing. Sirko Fricke
Author: Paul Huyton
