82 articles matches for Almen strips from year 2000 to present
Article Topic:Peening Blasting Vibratory Finishing Cleaning Miscellaneous Residual Stress Measurements
Author: David Bouttes
When Peening Accessories GmbH in Germany was founded 20 years ago in the year 2002, the concept was to have a company that could manufacture and distribute all kind of...
Author: Charlie Clouet
The contents in this report have been published in 5th CIRP CSI 2020 under the title- ‘Data Driven Optimization of Vibropeening’ © 2020 The Authors. Published by Elsevier B.V. This...
Author: Abhay Gopinath
Author: Rishabh K Shah
Shot peening as a means to extend the service life of components exposed to high bending, tensile and torsional stress has been around for decades. Yet, this technology is still...
Author: Chan Wai Luen, Kunal Ahluwalia, Abhay Gopinath
The requirements for flap peening have become more stringent since the new specification AMS 2590 was put in place. The rotary tool should be capable of operating at the specified...
Author: Rishabh Shah
Say WAAT?
Author: L.Wagner1, M.Wollmann1, C. Becker1, V. Jannaschk2, A.Montabaur2
Author: Paul Huyton
Besides fulfilling the general specifications for Almen strips, the most important requirement for the strips is the arc-height repeatability. That means that Almen strips show always the same arc height,...
In many industries, specifications are now demanding that items used for a particular process, especially if it is a so-called critical one, can be traced back to their origin. As...
Author: Prof. Dr. h. c. Dr.-Ing. Eckart Uhlmann, Dipl.-Ing. Fabian Faltin
Author: Paul Huyton